Material

Durga Electronics used only UL Approved moulding material.

Durga Electronics (India) Molding Materials

Flame Retardant Nylon 66 Glass Reinforced (Zytel FR50 BK 513) 
These materials have similar characteristics to Nylon 66 but have a Halogen free Flame Retardant additive, giving them UL94V0 at 0.8mm.


Nylon 66 Glass Reinforced 30% Non-F.R. (70G33L BK031 66) 
Used in the majority of Bobbin applications world wide due to its relative low cost and ability to mould thin sections which retaining a high degree of stiffness.
Glass reinforced Nylon having a rating of Class B (130 degree maximum).


Thermoplastic Polyesters (Rynite) - PETP (FR530L BK010)
These materials are increasingly selected for applications where high stiffness, low moisture absorption, dimensional and thermal stability characteristics are required. It is formulated as a flame retardant material with a UL rating of V0.it has temperature index of 140 0C, and has been able to get an insulation systems approved for Class H, 180 0C and Class N, 200 0C


Thermoplastic Polyesters - PBTP (SK655 FR1NC010)
This material is easier to mold because the material only has to be dried to 0.02% moisture before it is molded. It is formulated as a flame retardant material with a UL rating of V0. It has temperature index of 130 0C, and has been able to get an insulation systems approved for Class F, 155 0C. It has good volume Resistivity, low moisture absorption, and is quite stiff.

Moulding Materials
Specifications
 
Flame Retardent Nylon 66 Glass Reinforced
Nylon 66 Glass Reinforced 30% Non FR
Rynite PET
PBT

 
 
Continue

Powered by Abantecart eCommerce Solution